Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1441 | Printer Friendly Version | View Safety Disclaimer
Fairly easy task, requires minimal mechanical/electrical experience.
Video will show how to go about troubleshooting vacuum water flow alarms.
There is a strainer inside the on/off valve see picture below.
Inlet Strainer inside on/off solenoid valve. Many times this will plug up with sediment. It can be pulled out and flushed out. Slotted screw is the manual override also.
Possible Alarm Codes for this video are:
700033 – Warning – Vacuum Pump Supply Water Flow Too Low | Titan 3000 Series
700048 – Vacuum Pump Water Flow Alarm | Titan 2000 and 1000 Series
Last updated: January 19, 2022
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
