This video shows how to use the Sink Cutout Toolbox to mill sinks on the Titan. This icon is on the Park Industries Toolbar. It uses saved styles and applies them in the correct order when programming.
See the related videos for more setup information.
For more information on how to do basic Titan programming please reference the other suggested guides below…
Using Cut Holes (Video + links) –Link to the Video guide below
In this video we go through the Cut Hole Settings from the Machine Tab in AlphaCam, and show setups for Faucet Holes and Pilot Holes.
Using Cut Shape – Basics (Video+ Links) –Link to the Video guide below
Cut Shape is used to apply cutting information to geometry. This information can then be used to create a style if wanted. In this video we will go through all the settings used to make a common cut.
Basic Titan Programming (2 Videos+Links)–Link to the Video guide below
This is a very detailed video that explains all of the steps to program a Park Industries Titan. We follow the steps used in our training class at Park Industries. These steps can be downloaded from our website.
Creating Tools in AlphaCAM (Video)–Link to the Video guide below
How to draw and add tools to your AlphaCAM library.
Circle Coreholes Blind mounts slug bores Holes drills drilled drilling pilots faucets coring cores sinks clips sinkits drains covers styles cutouts basics