How To Program Digital Vacuum Gauge – Video

Guide Number: SG1444 | Printer Friendly Version | View Safety Disclaimer

Skill Level

Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

Time to Complete: 5 min

Video shows how to program a new digital vacuum gauge for your Titan or Titan FabCenter CNC.

  1. Press and hold SET for 3 seconds
    • Press UP or DOWN to select inH
  2. Press SET
    • 1 no appears (Do not change)
  3. Press SET
    • 2 no appears (Do not change)
  4. Press SET
    • 2.5 appears (Do not change)
  5. Press SET
    • nAn appears (Do not change)
  6. Press SET to return to the vacuum display
  7. Press SET
    • P_1 and 0.0 display alternates
    • Press and hold UP button to select -19.0
  8. Press SET
    • P_2 and 0.0 display alternates
    • Press and hold UP button to select -19.0
  9. Press SET
    • P_3 and 0.0 display alternates
    • Press and hold UP button to select -19.0
  10. Press SET
    • P_4 and 0.0 display alternates
    • Press and hold UP button to select -19.0
  11. Press SET to return to the vacuum display.
  12. Press and hold UP and Down buttons at same time to 0 the vacuum reading with vacuum pump not running.
  13. Press SET more than 5 seconds. Press UP or DOWN once to change to LoC and press set to return to vacuum display.

Last updated: January 23, 2022

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.

Acknowledge