fusion intensifier pump pressure control

Guide Number: SG0558 | Printer Friendly Version | View Safety Disclaimer

In the jet Edge intensifier pump manual it states the high pressure adjustment is outside the panel and the low pressure is inside. The Park Industries Fusion has the high pressure adjustment on the inside while the low pressure adjustment is on the outside. This was done because you may need to adjust the low pressure when piercing different thicknesses of stone. You will not need to adjust the high pressure.

Low Pressure adjustment

In the jet Edge intensifier pump manual it states the high pressure adjustment is outside the panel and the low pressure is inside. The Park Industries Fusion has the high pressure adjustment on the inside while the low pressure adjustment is on the outside. This was done because you may need to adjust the low pressure when piercing different thicknesses of stone. You will not need to adjust the high pressure.

Last updated: October 10, 2008

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.

Acknowledge